Ford Focus Automatic Instrument Cluster Speedo Repair For Int power loss 2004-2009

Description

This is for a Ford Focus Automatic Instrument Cluster Speedo Repair For LCD Display MK2 2004-2011

Common problems on the Ford Focus Automatic Instrument Cluster Speedo Repair For Ford Focus MK2 2004-2011 power are :

• • Intermittent power
  • Blinking cluster
  • Car not starting
  • Can bus error codes
  • Cluster repair audible turn signal indicator not working
  • Car not starting due to dashboard not coming on
  • Intermittent power
  • Power goes off when warm
  • This can be rectified in house by our experienced technicians.

All you have to do is remove and send the faulty instrument cluster to us.

We have full bench testing facilities and all functions can be tested.

All your vehicle settings remain the same as well as the current mileage, VIN number and other important settings.

If you have any questions regarding the Ford Focus Automatic Instrument Cluster Speedo Repair MK2 2004-2011, or would know how to remove your instrument cluster then please contact us.

How To Remove your Ford Focus Automatic Instrument Cluster :

1. Lower steering
2. Remove bottom trim for cluster
3. Remove 2 x T20 screws at bottom of cluster
4. Use a plastic wedge and slide between the top of the cluster , there are normally 2 metal clips and pull forward
   Unclip the plug at the rear of the instrument cluster.