Description
Mercedes E Class W211/R230 SBC Repair CODE C249F
Mercedes E Class W211/R230 SBC Repair CODE C249F – Sensotronic Brake Control (SBC)
If you own a Mercedes E Class W211 or SL R320 and have a brake error, then you must replace the SBC unit which can be very expensive from the dealer.
Please note, we can only repair the fault electronically and not the physical hydraulic. It is recommended for the car to be present at our workshop to confirm a successful repair.
The SBC module counts breaking cycles, after exciting the value of approx 300000 , an error message occurs.
It’s a kind of protection for the electro motor inside the aggregate.
So far we had no problems, we’ve tested the first module over 2 years ago, reset this and reused in a car sucessfuly.
This is an exclusive service by Revtronic, carried out at our workshop. As many claim that a new unit must be fitted.
The SBC will have to be removed and sent into us.
The unit has to be disabled before removing.
Errors reported:
- SBC Control module failure
- STOP displaying on instrument cluster
- Brake defective stop vehicle (Normally displayed on the screen)
- Mercedes E Class W211/SL R230 SBC Repair CODE C249F
OPERATING TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT) ON A W211 MERCEDES E220 CDI FAULT CODE IS C249F
We have successfuly repaired the following Bosch Part Numbers:
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 012 (0265960012)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 013 (0265960013)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 015 (0265960015)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 018 (0265960018)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 019 (0265960019)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 020 (0265960020)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 023 (0265960023)
- Mercedes E Class W211/R230 SBC Repair CODE C249F – 0 265 960 025 (0265960025)
You now have 2 options for Mercedes E Class W211/R230 SBC Repair CODE C249F service :
- You can call our workshop and arrange for your Mercedes E Class W211/R230 SBC Repair CODE C249F to be repaired at our workshop. There is no need to remove the SBC . Using special diagnostic hardware we can reset this fault. This will save alot of time and labour , no need to remove SBC.
- Carefully remove the SBC control unit , there is a special way to remove the SBC, you will haev to de-activate the pump first. There is also a very special procedure to refit . Taking to an independent specialist is highly advised.
There is a special procedure to remove the SBC unit. Please take your car to a qualified technician. If uncertain on how to remove the SBC unit , please contact us.
Please contact us if your part number is not listed.